|
|
||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
||||||||||
|
| EASY FRAME
|
EASY FRAME A The Easy frame A support construction is designed by Prolyte in conjunction with Stageco. • Suitable for indoor stages with variable height (1000/2700 mm) The top and bottom frame are connected through an internal tube system with pre-fabricated holes at each 100 mm. The holes make it possible to vary the height from 1000 mm to 2700 mm in steps of 50 mm. Adjustable feet with screw jacks, placed in the bottom frame, make it possible to level the stage at an exact position. By using the top frame only, a minimum stage height of 1000 mm can be obtained. • Free access under stage, with left/right as well as front/back walk-ways The Easy frame A system provides free paths of 2m wide in two directions under your stage, without any loss of allowable loading. The maximum allowable load of 750 kg/m2 and 10% horizontal load are guaranteed. • Standard stage elements provide your stage floor • Outside stage is outside support construction • No tools needed • As less loose parts as possible • Fast assembly • Low self weight 
|
 |
|
| EASY FRAME A
|
 |
||
| EASY FRAME B
|
|
||
| EASY FRAME C
|
|
||
| MAIN AND CROSSBEAMS
| |
||
| STAGE DEX RAMP
|
|
||
Copyright © Prolyte Products
Group. All Rights Reserved. Specifications are subject to change without notice. Proprietary Notice. |